Step-by-Step Removal Process: Remove Kohler Bathroom Faucet
Removing a Kohler bathroom faucet is a straightforward process that can be accomplished with basic tools and a little patience. This guide will walk you through the steps, ensuring you remove the faucet safely and efficiently.
Turning Off the Water Supply, Remove kohler bathroom faucet
Before beginning any work on your faucet, it is crucial to turn off the water supply to prevent flooding.
- Locate the shut-off valves for your bathroom sink. These valves are typically found under the sink or on the wall behind it. They will be round or square knobs with handles.
- Turn the valves clockwise to shut off the water supply. Once the valves are fully closed, run the faucet to ensure the water flow has stopped completely.
Disconnecting the Water Supply Lines
After turning off the water supply, you can disconnect the water lines from the faucet.
- Use a wrench to loosen the nuts connecting the supply lines to the faucet. The nuts may be difficult to turn due to mineral buildup or corrosion. In such cases, you can use a pipe wrench or a penetrating oil to loosen them.
- Once the nuts are loosened, gently pull the supply lines away from the faucet. Be careful not to pull too hard, as this could damage the lines or the faucet.
- Once the supply lines are disconnected, place towels or a bucket underneath the faucet to catch any remaining water droplets.
Removing the Faucet Cartridge
The faucet cartridge is the heart of your faucet, controlling the flow of water. To remove it:
- Locate the cartridge access panel. This is typically a small, round or square cover on the faucet body. You may need to use a screwdriver to remove it.
- Once the access panel is removed, you will see the faucet cartridge. It is usually held in place by a retaining nut or clip. Use a wrench or pliers to loosen and remove the retaining nut or clip.
- Gently pull the cartridge out of the faucet body. Be careful not to damage the cartridge or the faucet body.
Removing the Handle
The handle is the part of the faucet that you turn to control the water flow.
- Locate the handle screw. This is typically found on the underside of the handle or on the side of the faucet body. You may need to use a small screwdriver to remove it.
- Once the screw is removed, gently pull the handle off the faucet body. Be careful not to damage the handle or the faucet body.
Removing the Spout
The spout is the part of the faucet that dispenses the water.
- Locate the spout nut. This is typically found underneath the spout, where it connects to the faucet body. Use a wrench to loosen and remove the nut.
- Once the nut is removed, gently pull the spout off the faucet body. Be careful not to damage the spout or the faucet body.
Removing the Escutcheon
The escutcheon is the decorative plate that covers the faucet mounting holes.
- Locate the escutcheon screws. These are typically found on the sides of the escutcheon. Use a screwdriver to remove them.
- Once the screws are removed, gently pull the escutcheon off the sink. Be careful not to damage the escutcheon or the sink.
